Detail Information
Hydraulic Butt Fusion Machine V315 CNC 90MM-315MM (3" IPS -10" IPS)
The RIYANG V-CNC series automatic hydraulic butt welding machine V315 CNC is applied to joint PE, PP, PPR and PVDF pipes and moulded fittings.
Selection of components with a long service life ensures a low maintenance and repair, friendly and reliable operation.
|
Product Details
|
|||
|
WELDING RANGE O.D.
|
90MM - 315MM
|
PISTON AREA
|
20.02 cm²
|
|
POWER SUPPLY
|
*220V±10%, 50/60HZ
|
TEMPERATURE RANGE
|
MAX. 320ºC
|
|
HEATER POWER
|
3.0KW
|
PACKING DIMENSION
|
930*620*630 MM
|
|
TRIMMER POWER
|
1.5KW
|
630*600*730 MM
|
|
|
PUMP POWER
|
0.75KW
|
650*340*380 MM
|
|
|
WORKING PRESSURE RANGE
|
0 - 80 BAR
|
GROSS WEIGHT
|
241KGS
|
|
V-CNC series Characteristics
|
|||
|
WELDING CONTROL SYSTEM
|
FULLY MONITORED BY CNC CONTROL UNIT
|
||
|
DATA LOGGING CAPACITY
|
2000 REPORTS
|
||
|
WELDING MONITORING SYSTEM
|
AMBIENT TEMPERATURE, INPUT VOLTAGE, HEATING TEMPERATURE, WELDING PRESSURE, WELDING TIMES, HEATING OPERATION, TRIMMING OPERATION, MEMORY CONTROL
|
||
|
WELDING STANDARD
|
DVS, ISO, WIS, UNI, AND OTHERS UPON REQUEST
|
||
|
LANGUAGES
|
AVAILABLE UPON REQUEST
|
||
|
WARRANTY PERIOD
|
2 YEARS
|
||
FEATURES
 |
Basic Frame
Featured by
- Oil seal kit, origins from Germany, make sure that the
pressure performance stays in a more stable way.
- 4sets quick coupling helps the operator to prepare
the machine is better before and after welding, and we
use STUCCHI which from Italy ensures no hydraulic oil
leakages when unplug or plug in.
- Using an integral shaft (top chromate treatment)
instead of the assembled shaft, ensure the chassis
strength to avoid possible frame twist or deform
when dragging the pipe with extreme parameters.
|
|
Heating Plate
Featured by
- We use Dupont from the USA for coating the heating plate,
which is the best in the industry.
It's many stickers on an aluminum plate,
more non-sticky to plastic pipes surface.
The temperature deviation of different points on the heating
plate is 2-3 degrees (small size machine) and 5-6 degrees
(big size machine).
Trimmer
Featured by
- Safety Switch, which guarantees the operators' security,
even with power on, the trimmer will not be running if
operators do not press the button.
Support
Featured by
- Ergonomic design
|
 |
 |
V-CNC Series
Featured by - The CNC hydraulic control box is available for all
RIYANG basic model machines, covering the size from
O.D 50mm through O.D 1200mm.
A fully encased control box makes the protection level up to IP 54.
- Due to the unique powertrain, it could
not only create sufficient hydraulic power
during the welding procedure but also makes
sure precise control. And most importantly,
it greatly reduces the weight of the control box.
And the servo-motor applied significantly
reduces the failure possibility and maintenance cost.
- All connection sockets are located at the back of
the hydraulic control unit, including sockets
for the trimmer tool and heating plate.
No additional power distributor is needed.
- Various welding standards (DVS, ISO, WIS, etc.)
could be pre-installed in different languages upon your request.
All welding reports could be saved immediately to internal
memory with a capacity of 2000 reports after
welding accomplished, or print the report. Meanwhile,
it is available for downloading through the USB interface.
- All RIYANG V-CNC series hydraulic control box is
featured with PLC touch screen, extremely user-friendly
RFID access technology. Troubleshooting and program
upgrades are available for remote control.
- When the heating plate hooks up with the machine chassis,
inserting or release the heater will be controlled remotely
by a hydraulic unit, which is the same as a trimmer.
These characteristics prevent the operators from being injured.
|
